Strategic partner

Global series












Exhibitor List

Company SIGAS MEASUREMENT ENGINEERING CORP.
Country China
Products Analysis and laboratory techniques
Environmental monitoring techniques and equipment
Hall E5
Booth E36
Website www.sigas-group.com
Introduction SIGAS Measurement Engineering Corp. is a high tech company.SIGAS is mainly engaged in trace gas analysis equipment and provides complete gas monitoring systems, which are used in environmental monitoring and industrial process. SIGAS products can be widely used in petroleum, chemical, metallurgy, mining, pharmaceutical, semiconductor processing, packaging industry, as well as the flue gas on-line monitoring, TOC value measurement of water, including agricultural greenhouse gas detection, gas safety monitoring, terrorist attacks, storage and transportation of dangerous goods.

Products

NDIR Gas Analyzer SA-200
SA 200 series is a multi-gas analyzer for 19"rack-mounting. Up to 7 components can be measured and the measuring principles may be ordered in various combinations. SA 200 is equipped with a touchscreen. In combination with a well-arranged menu structure, intuitive and user-friendly operations is assured. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered.
Enviroment pollution control
Service and testing
Waste gas analysis
Process gas analysis
Air quality control
TOC value measurement
Blast furnace gas detection
Garbage landfill
Tunnel gas detection
Photoacoustic Analyzer SPTr-GAS® Analyzer
SIGAS SPTr-GAS®ANALYZER is equipped with a 5.6'’ touchscreen, in combination with a well-arranged menu structure, intuitive and user-friendly operation are assured. All necessary status. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered.
Photoacoustic technology is an innovative spectrum analysis method, which is different to tranditional infra-red technology. This method transfer effective spectrum into acoustic signal, and assemble this acoustic signal through high sensitive microphone, withthis signal the gas concentration will be calculated.
Portable photoacoustic Analzyer SPTr-GAS® PORT 200
SPTr-GAS® PORT 200 is high end photoacoutic portable gas analyzer, which is small, light, easy to carry for end user. All limit value / alarm value can be adjusted by user. The screen can shows also measurement value . The calibration of zero or span will achieved automatically. SPTr-GAS® PORT 200 shows good accuracy and stability, it fulfill many kinds of trace gas measurement application.
□ High accuracy, good linearity, good stability
□ easy operation and maintainess
□ with high-end photoacoutic technology
□ automatic calibration with air
□ Avoid humidity effect on measurement value :
infrared humidity sensor is integrated inside the photoacoustic module.
Online Gas compressor cooler GC-7003
SIGAS GC-7003 are online and portable gas pretreatment system which is necessary for online gas measurement system. For industry area, we use this product to reduce and make stable humidity, to insure the stable gas measurement value.
GTL heat exchange technology
Gas Tornado Laminae is patent technology to reach 36m/s dry speed. Together high effective peristaltic pump to fulfill cooler requirement under 7N/min gas flow. Standard version offer -10℃...-35℃ dry Temp. and cooler capacity 320-410W.
Increase 25% system capacity
with double channel heat exchange and peristaltic pump the cooler use micro channel to exchange the heat, to insure the heat well-distributed around heat tube, to increase 25% system capacity.
Human computer interaction unit
use industry level display to make HCI unit easy to handle. It fulfill IP54 standard.
Filter system
The filter system of this product is modularization parts which can filter 10μm-0.01μm Solid suspended particulate and 99.99% Dissolved colloid. We use PTFE material for filter. The ceramics material is option.
Data control system
Industry level MDU with high speed calculation and intelligent control ability, which can control and calculate 8-128 single parts.
NDIR Diffusion sensor S-MODULE Basic
The smartMODULBASIC series is the optimal solution for all applications in which an ambient air sensor should be reliable and at the same time simple in its handling. The compact design of the gas sensors makesit possible to install them in the smallest housings.
Revolutionary Multi-gas Module S-MODULE Silarex
S-MODULE Silarex is multi-gas module which used NDIR technology, can make accurate quantitative analysis and calculate the concentration value by detecting the absorption spectrum of gas. This module can detect multiple gas at the same time and remove the impact of interference gas. Our products has reached the highest standards of accuracy, reliability and efficiency and can be used to different application.
Gas combination example: CO/CO2, SO2/NO/CO2
S-ULTRA.Sens NDUV Gas Module
The gas analysis based on the NDUV techniques is a well-known method to determine the concentration
in complex gas mixtures. The ULTRA.sens module uses modern optical components to achieve
optimized analyzer results. We use a special LED/EDL-Technology in order to get stable radiation
emission. The result is a high resolution gas analysis system which can detect gas concentration changes of less than 1ppm .
The entire structure can be disassembled to make the maintenance/service easier. The different devices are sealed with O-Ring joining. The stainless steel sample cell is coated with a protection layer.
The length is 100mm. For the combined detection of NO, NO2 and SO2 three different light sources areintegrated.
NDIR Gas Flowsensor
NDIR sensors from smartGAS offer many advantages for successful process control and are ideal for use in gas analysis. Our NDIR sensors have a large spectrum of measurable gases and are especially convincing where it is important to have the utmost precision and reliability.
Our NDIR sensors in the smartMODULEVO series combine measuring precision with compact design and simple handling. We have minimised sizes considerably, compared with many standard solutions, without having to make compromises in terms of performance. This way we offer you the highest quality in the smallest space.
The concentration signals can be read out as real values by means of UART interface and modbus data protocol. Downstream allocation is therefore not necessary. You receive our NDIR sensors as a plug & play version – pre-calibrated and temperature-compensated. You can integrate them into your device straight out of the packaging.
Are simple handling, compact design and high reliability important to you? Then our NDIR sensors from the smartMODULEVO series are the perfect choice for your application in gas analysis.
Portable Gas Analyzer SPGAS® PORT 110
SPGAS® PORT 110 is SIGAS comprehensive portable analzyer type, which can equipped with all kind of gas sensors according to customer requirement with alarm output and real time concentration display. Used for industry routing inspection, toxic gas measurement and so on.


SPGAS® PORT 110 can equipped sensors:

- NDIR SENSOR
- NDUV SENSOR
- TCD SENSOR
- PID SENSOR
- EC SENSOR


SPGAS® PORT 110 Features:

1. Portable design, Internally integrated high capacity battery, used for more than 8 hours working time, suitable for all kind of motive gas measurement requirement.

2. Internal space for all kind of sensors, NDIR,NDUV,TCD,PID,EC, which can flexible install sensors according to customer requirement.

3. integrated low noisy pump, for high stable sampler gas.

4. Equipped with zero calibration button, for adjust the automatic calibration after turn on, freely according to customer need.

5. Equipped with simply “Start”, “Stop”, “Blow back” function all on the surface of device.

6. Simply display with clear design (Date, battery, all status, concentration, alarm, calibration and so on.)

7. Flexible gas connection, 1/8"NPT connector suitable with all kind of gas joint。

8. internal filter protection, for protect high accuracy sensor with pollution.

9. Back side with RS232 connection, charging and display for charging and USB connector.

10. Measurement data can be stored on USB, store cycle adjust by customer

11. Concentration item and alarm can be set by customer.

12. Standard type can show 1-3 channels

13. Standard software can be used for store data with excel or TXT version, also with full function adjustment.
NDIR Gas Flowsensor
NDIR sensors from smartGAS offer many advantages for successful process measurement and are therefore ideal for use in process control. They have a large spectrum of measurable gases and are especially convincing where it is important to have the utmost precision and reliability. Different versions can be very easily combined, also facilitating complex measuring tasks. All smartGAS sensors are designated by low detection limits, very small drift, a large temperature range and a fast response time and markedly low operating and maintenance costs

"Ready to use" NDIR sensors
low maintenance
low detection limits
selectiv against influencing gases
flexible interfaces
Temperature and drift compensated
Compact construction

Our NDIR sensors in the FLOWEVO series combine measuring precision with compact design and simple handling. We have minimised sizes considerably, without having to make compromises in terms of performance.

Back to Exhibitor List

IE expo China 2024 is presented by IFAT © 2023 版权所有 沪ICP备12049585号-8