Strategic partner

Global series






Exhibitor List

Company SHANGHAI MOUDI GENERAL EQUIPMENT CO.,LTD.
Country China
Products Waste incineration
Dust removal
Treatment of volatile organic compounds(VOCs)
Desulphurization and denitrification
Hall E6
Booth A38
Website www.moudifans.com
Introduction Shanghai Mudi General Equipment Co., Ltd. was established in 2013, located in Shanghai Fengxian Qingcun (municipal) Industrial Park, with a registered capital of 10 million yuan.The company has a perfect talent structure, complete production equipment system, and has a profound background and rich experience in fan design and manufacturing.Over the years, Mudi Company has achieved rapid development, and the technical indicators and practical results of its products have been fully recognized and praised by customers, and now it has become a well-known enterprise in the ventilation industry.

Products

MDT backward tilting high efficiency centrifugal low pressure industrial fan
Air volume range: 1000m3/h-540000m3/h
pressure range: 1000-5000Pa
The highest temperature: 550℃
Impeller diameter: 280mm-2500mm
Driving: direct coupling, shaft coupling, belt
Description: MDT series are medium and low pressure large air volume fans with flat tilting blade structure and low cost.
Material: Q235; Alloy steel; optional 304, 316L stainless steel; The impeller can be made of aluminum alloy.
Application: Used for conveying large flow and relatively clean air. For example, combustion air supply, filtration and drying systems,painting rooms and other exhaust systems, air pollution control (clean side of dust collection) and other industrial processes.
MDR high pressure and high efficiency centrifugal fan
Air volume range:1000m3/h-13000m3/h
pressure range: 2500-30000Pa
The highest temperature: 550℃
Impeller diameter: 400mm-1800mm
Driving : direct coupling, shaft coupling, belt
Description: MDR series belong to high-pressure blower, which adopts turbine to increase blade structure design.
Material: Q235; Alloy steel; optional 304, 316L stainless steel; The impeller can be made of aluminum alloy.
Application: The utility model is applicable to the occasions with small air volume and high air pressure. For example, flue gas transport,low-concentration particulate gas, pneumatic transport and so on.
MDK backward tilting double feed centrifugal fan
Air volume range: 2000m3/h-600000m3/h
pressure range: 800-3800Pa
The highest temperature: 120℃
Impeller diameter: 280mm-2100mm
Driving: direct coupling, shaft coupling, belt
Description: MDK series are medium and low pressure large air volume fans using flat tilting blade structure design, low cost.
Material: Q235; Alloy steel; optional 304, 316L stainless steel; The impeller can be made of aluminum alloy.
Application: Widely used in large flow of clean air transport occasions. Such as air conditioning, painting workshop air supply, air pollution control and other occasions.
MDA2 backward tilting medium pressure industrial fan
Air volume range: 2000m3/h-150000m3/h
pressure, range: 2500-32000Pa
The highest temperature: 420 °C
Impeller diameter: 315mm-2000mm
Driving: direct coupling, shaft coupling, belt
Description: MDA2 series belong to medium pressure fans, which are designed with reclining veneer blade structure.
Material: Q235; Alloy steel; optional 304, 316L stainless steel; The impeller can be made of aluminum alloy.
Application: Used for heavy duty air handling applications, for conveying air, smoke, vapor emissions and gases containing minor pollution.
MDE backward tilt centrifugal low pressure industrial fan
Air volume range: 1000m3/h-540000m3/h
pressure range: 1000-5000Pa
The highest temperature: 550℃
Impeller diameter: 280mm-2500mm
Driving: direct coupling, shaft coupling, belt
Description: MDE series are medium and low pressure large air volume fans with flat tilting blade structure and low cost.
Material: Q235; Alloy steel; optional 304, 316L stainless steel; The impeller can be made of aluminum alloy.
Application: Used for conveying large flow and relatively clean air. For example, combustion air supply, filtration and drying systems,painting rooms and other exhaust systems, air pollution control(clean side of dust collection) and other industrial processes.
MDS back bending medium pressure high efficiency industrial fan
Air volume range: 1500m3/h-487000m3/h
pressure range: 600-7000Pa
The highest temperature: 550 °C
Impeller diameter: 400mm-3100mm
Driving : direct coupling, shaft coupling, belt
Description: MDS series belongs to medium pressure and large air volume fans, which are designed with back bending veneer blade structure and wide range of flow pressure.
Material: Q235; Alloy steel; optional 304, 316L stainless steel; The impeller can be made of aluminum alloy.
Application: Used for conveying large flow and relatively clean air. Such as combustion air supply, environmental protection equipment,painting workshop and other exhaust system, fluidized bed boiler and bag-type dust collector blower.

Back to Exhibitor List

IE expo China 2020 is presented by IFAT © 2020 版权所有 沪ICP备12049585号