Exhibitor List
| Company | HCP PUMP （SHANGHAI） CO.,LTD |
| Country | Taiwan, China |
| Products | Pumps and lifting systems |
| Hall | W5 |
| Booth | E42 |
| Website | www.hcppump.com.cn |
| Introduction | Founded in 1979, Kasumi Electric Industry Co., Ltd. is one of the leading submersible pump manufacturers in Taiwan and sells its products worldwide under the HCP brand.
Kawami HCP will lead the enterprise forward with the continuous evolution of pump technology, combined with intelligent manufacturing and application, and create the highest value for customers. Kawami will continue to create a more convenient water environment, so that the environment can be sustainably circulated, and bring a better future to mankind. |
Products
| F/FN General Purpose Dirt Pumping ● Provide non-blocking impeller design: U/P type impeller can play the maximum drainage function for sewage containing solid or fibrous substances. ● F/FN-UL Series Pumps: Enlarged through-through particle size, 100% foreign matter particles can be passed, and it is less likely to cause clogging. ● F/FN-V Series Pumps: 3" (80mm) upward outlet, lightweight design, no need to use elbows, more economical than general FN series. ● The mechanical shaft seal lubricating oil is made of food medical grade high-purity white mineral oil, which has a clear and transparent appearance, colorless and tasteless, insoluble in water, and conforms to the US Food and Medical Administration FDA and European REACH. and other national norms, does not contain poisons, will not pollute the environment and endanger biological and human health. ● Fully equipped: Epoxy waterproof cable base, motor overload protector, dual-group SiC silicon carbon steel (Silicon Carbide) mechanical shaft seal, all of which have passed the highest standard of quality and rigorous quality inspection procedures in the industry. |
 |
| AF Sewage Wastewater Pumping ● Passed the CNS national standard certification, the whole shell is made of cast iron, the structure is sturdy and durable, and the quality performance is excellent. ● The pump handle above 5HP is triangular, which is convenient for hanging operation in the form of detachment. ● The shaft seal chamber is designed with oil riser to strengthen the lubrication effect of the shaft seal and prolong the service life of the pump. ● The mechanical shaft seal lubricating oil is made of food medical grade high-purity white mineral oil, which has a clear and transparent appearance, colorless and tasteless, insoluble in water, and conforms to the US Food and Medical Administration FDA and European REACH. and other national norms, does not contain poisons, will not pollute the environment and endanger biological and human health. ● A variety of non-blocking impeller designs: U-Shaped Impeller: A vortex impeller that creates a vortex flow of water to extract thicker sludge or liquids containing long fibrous substances. P-type impeller: open impeller, can be divided into single vane or double vane impeller, the blade can cut off the general foreign matter, prevent solid dirt blockage, reduce the occurrence of pump blockage failure. E-type impeller: channel impeller, high efficiency, large water volume, can pass through large foreign matter particles, not easy to produce blockage. |
 |
| SF/SA stainless steel dirt/effluent pump ● Optimized structural design, using dry motor, built-in motor overload protector, dual-group SiC Silicon Carbide mechanical shaft seal, pump casting, shell SUS316 / SCS14 Not material. Dewaxing precision casting ● Using the advanced dewaxing casting method of stainless steel, the mold accuracy is extremely high, and its products are solid and not easy Sand holes, anti-corrosion; The surface is smooth and has a high sense of value. Viton Tight ● The waterproof structure of the whole pump is made of Viton Tight, which has excellent drug resistance and resistance to acid and alkali Corrosion of liquids. ● Gray iron (FC200 series) products can be used in domestic wastewater environments, and industrial environments can be used Using Vostin iron type stainless steel (SUS300 series), SUS316 / SCS14 is better than SUS304 / SCS13 material, resistant to weak acid, Alkaline environment. ● This model is only suitable for use in pH 4~10 (0~40°C) environment, if you need to use it in strong acid and alkali or highly corrosive liquids, it may convey fluids Chemical changes will occur in the metal, and corrosion phenomena may occur, and other chemical-specific pumps are recommended. |
 |
| IC Amphibious Pumps ● The internal castings of the pump are all treated with high-solid painting, which doubles the anti-stiffness effect and prolongs the service life. ● Dry motor design, all-cast iron motor shell, cast iron frame for fast heat dissipation, high-precision assembly, including AC motor protector, the motor is not easy to burn, equipped with double-group SiC silicon carbon steel (Silicon Carbide) mechanical shaft seal and oil seal, EPOXY waterproof cable base, excellent waterproof structure, long durability and life. ● Fully water-cooled motor, water flow directly through the motor side, can run for a long time, the motor is power-saving and has high efficiency. ● Excellent impeller design, which can provide high head, large water performance, and excellent suction power (about 8m), suitable for well pumping. ● ADTC (Adapter Connection) can be used as a continuous pump, and can be used for relay drainage or pipeline pressurization for onshore installation. ● IC-32B~610 adopts chrome steel impeller (Chrome Steel), the hardness can reach HRC 30~35 degrees, which is more corrosion-resistant, more wear-resistant, and the service life of the pump is also longer. |
 |
| l Large drain pump ● Solid pump structure, dry motor, double-group mechanical shaft seal, good waterproof, impeller diversion device, smooth water flow, long-term operation and use, pump waterproof grade in line with IP68. ● Light weight, easy to operate, convenient maintenance. ● Axial flow and oblique flow impeller design, low lift and large water volume, energy saving, in line with economic benefits. ● The impeller ALBC3 is made of aluminum bronze, which is an excellent grade of copper material, which is resistant to seawater corrosion and durable. ● Pump FC200 cast iron parts are treated with high solid painting, and the product has a longer service life. ● The whole series of L-type is equipped with anode sheet as standard, which uses the principle that different metals have different potential differences, so that the metal with lower potential can form an anode, and replace the pump casting to release metal ions (corrosion), which can effectively slow down the corrosion rate of the pump in seawater and prolong the service life of the pump. |
 |
| GD fortifications light pump ● The parts below the shaft seal: wear plates, impellers, housings, and housing covers, all covered with special synthetic rubber materials, high wear resistance, suitable for the discharge of sediment and water. ● The motor frame and shaft seal seat are made of lightweight aluminum alloy, which is easy to move and has high mobility; The one-piece stainless steel filter is not easy to corrode and is better than the general iron mesh filter. ● Two types of liquid level float equipment are available: upright float (FV) and general float (F); The pump will automatically start when the water level rises and stop automatically when the water level drops, the device is simple and practical, the cost is low, and there is no need for personnel to operate. ● The new dual-angle outlet design is convenient for the use of various environments, and can easily pump water from narrow pits as small as 20 cm (Figure 1) to large pumping environments (Figure 2). ● Fully equipped: VCT cables, epoxy waterproof cable bases, motor overload protectors, and double-group mechanical shaft seals are made of Silicon Carbide, all of which have passed the industry's highest standards of quality and rigorous quality inspection procedures. |
 |
| HD fortifications pump ● Purpose design, lightweight mechanism, light operation and movement, can be used in a variety of construction sites. ● Self-cooling pump, water flow through the motor side, low motor temperature rise, suitable for long-term operation. ● The internal castings of the pump are all treated with epoxy resin high-solid waterproof topcoat, which can prolong the life of the metal and avoid corrosion and oxidation. ● Diversified impeller design, made of high chromium steel (HiCrFC) material, with a hardness of up to HRC 55~60 degrees, which is the highest toughness and high hardness impeller in the construction pump; And the high-hardness material is wear-resistant, and can resist sand and stone wear for a long time. ● Fully equipped: Epoxy waterproof cable base, motor overload protector, and double-group SiC Silicon Carbide mechanical shaft seal, all of which have passed the highest standards of quality and rigorous quality inspection procedures in the industry. |
 |
| TKE Sewage Lifting Device In many low-lying areas and places where drainage is not easy, it is no longer possible to use gravity flow to discharge the stagnant water around the environment, at this time, you can use Kawami's sewage lifting device to collect and store the sewage first, and then control the water level in the barrel through the level controller, and then use the pump to pump the sewage to the collection and discharge pipe network. |
 |
| J Jet stream aeration pumping ● The unique mixing chamber design can inhale more air to produce more fine bubbles and better aeration effect. ● High-efficiency dirt impeller design, suitable for all kinds of sewage environment, with filter design, to prevent foreign matter blockage. ● The design of submersible aerator can effectively block and reduce the noisy noise of operation and improve the quality of the working environment. During operation, the air suction pipe on land can be equipped with a silencer to reduce the volume of air suction and exhaust in the pipeline. ● Single single-pipe aeration device, PVC diffusion pipe corrosion-resistant, simple and clear system, no need for complex piping. It can be equipped with an automatic landing and dismounting device for more convenience. ● The aeration nozzle of the automatic landing device type aerator is designed on the pump side, which can be convenient for hoisting and cleaning. There is no possibility that the aeration function will be blocked in the water and the body will be detached. ● No special fixing and installation methods are required, the structure is simple, easy to install, and compared with the onshore blower unit, it can save the ground space and the cost of anechoic chamber construction. |
